Specifies contact information for a person or organization.

Need to track contact information in the same way across multiple resources.

The name of an individual to contact.

If there is no named individual, the telecom information is for the organization as a whole.

The contact details for the individual (if a name was provided) or the organization.

A contributor to the content of a knowledge asset, including authors, editors, reviewers, and endorsers.

Need to track contributor information in the same way across multiple resources.

The type of contributor.

The name of the individual or organization responsible for the contribution.

Contact details to assist a user in finding and communicating with the contributor.

Describes a required data item for evaluation in terms of the type of data, and optional code or date-based filters of the data.

The type of the required data, specified as the type name of a resource. For profiles, this value is set to the type of the base resource of the profile.

The profile of the required data, specified as the uri of the profile definition.

The intended subjects of the data requirement. If this element is not provided, a Patient subject is assumed.

The subject of a data requirement is critical, as the data being specified is determined with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what data is available based on its relationship to the subject. In CQL, this corresponds to the context declaration.

Indicates that specific elements of the type are referenced by the knowledge module and must be supported by the consumer in order to obtain an effective evaluation. This does not mean that a value is required for this element, only that the consuming system must understand the element and be able to provide values for it if they are available.

The value of mustSupport SHALL be a FHIRPath resolvable resolveable on the type of the DataRequirement. The path SHALL consist only of identifiers, constant indexers, and .resolve() (see the Simple FHIRPath Profile for full details).

Code filters specify additional constraints on the data, specifying the value set of interest for a particular element of the data. Each code filter defines an additional constraint on the data, i.e. code filters are AND'ed, not OR'ed.

The code-valued attribute of the filter. The specified path SHALL be a FHIRPath resolvable resolveable on the specified type of the DataRequirement, and SHALL consist only of identifiers, constant indexers, and .resolve(). The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements (see the Simple FHIRPath Profile for full details). Note that the index must be an integer constant. The path must resolve to an element of type code, Coding, or CodeableConcept.

The path attribute contains a Simple FHIRPath Subset that allows path traversal, but not calculation.

A token parameter that refers to a search parameter defined on the specified type of the DataRequirement, and which searches on elements of type code, Coding, or CodeableConcept.

The valueset for the code filter. The valueSet and code elements are additive. If valueSet is specified, the filter will return only those data items for which the value of the code-valued element specified in the path is a member of the specified valueset.

The codes for the code filter. If values are given, the filter will return only those data items for which the code-valued attribute specified by the path has a value that is one of the specified codes. If codes are specified in addition to a value set, the filter returns items matching a code in the value set or one of the specified codes.

Date filters specify additional constraints on the data in terms of the applicable date range for specific elements. Each date filter specifies an additional constraint on the data, i.e. date filters are AND'ed, not OR'ed.

The date-valued attribute of the filter. The specified path SHALL be a FHIRPath resolvable resolveable on the specified type of the DataRequirement, and SHALL consist only of identifiers, constant indexers, and .resolve(). The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements (see the Simple FHIRPath Profile for full details). Note that the index must be an integer constant. The path must resolve to an element of type date, dateTime, Period, Schedule, or Timing.

The path attribute contains a Simple FHIR Subset that allows path traversal, but not calculation.

A date parameter that refers to a search parameter defined on the specified type of the DataRequirement, and which searches on elements of type date, dateTime, Period, Schedule, or Timing.

The value of the filter. If period is specified, the filter will return only those data items that fall within the bounds determined by the Period, inclusive of the period boundaries. If dateTime is specified, the filter will return only those data items that are equal to the specified dateTime. If a Duration is specified, the filter will return only those data items that fall within Duration before now.

Specifies a maximum number of results that are required (uses the _count search parameter).

Enables the requirement "most recent 5 results" to be expressed.

This element can be used in combination with the sort element to specify quota requirements such as "the most recent 5" or "the highest 5".

Specifies the order of the results to be returned.

Enables the requirement "most recent 5 results" to be expressed.

This element can be used in combination with the sort element to specify quota requirements such as "the most recent 5" or "the highest 5". When multiple sorts are specified, they are applied in the order they appear in the resource.

The attribute of the sort. The specified path must be resolvable from the type of the required data. The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements. Note that the index must be an integer constant.

The direction of the sort, ascending or descending.

The parameters to the module. This collection specifies both the input and output parameters. Input parameters are provided by the caller as part of the $evaluate operation. Output parameters are included in the GuidanceResponse.

The name of the parameter used to allow access to the value of the parameter in evaluation contexts.

Whether the parameter is input or output for the module.

The minimum number of times this parameter SHALL appear in the request or response.

The maximum number of times this element is permitted to appear in the request or response.

A brief discussion of what the parameter is for and how it is used by the module.

The type of the parameter.

If specified, this indicates a profile that the input data must conform to, or that the output data will conform to.

Related artifacts such as additional documentation, justification, or bibliographic references.

Knowledge resources must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.

Each related artifact is either an attachment, or a reference to another knowledge resource, but not both.

The type of relationship to the related artifact.

A short label that can be used to reference the citation from elsewhere in the containing artifact, such as a footnote index.

A brief description of the document or knowledge resource being referenced, suitable for display to a consumer.

A bibliographic citation for the related artifact. This text SHOULD be formatted according to an accepted citation format.

Additional structured information about citations should be captured as extensions.

The document being referenced, represented as an attachment. This is exclusive with A url for the resource element. artifact that can be followed to access the actual content.

If the type is predecessor, this is a reference to the succeeding knowledge resource. If the type document or resource element is successor, present, this is a element SHALL NOT be provided (use the url or reference to in the prior knowledge resource. Attachment or resource reference).

The related artifact, if the artifact document being referenced, represented as an attachment. This is not a canonical resource, or a exclusive with the resource reference to a canonical resource. element.

The publication status of the artifact being referred to. related resource, such as a library, value set, profile, or other knowledge resource.

The date of publication of If the artifact being referred to. Short Display Date of publication of type is predecessor, this is a reference to the artifact being referred succeeding knowledge resource. If the type is successor, this is a reference to Cardinality 0..1 Type date Summary true the prior knowledge resource.

A description of a triggering event. Triggering events can be named events, data events, or periodic, as determined by the type element.

If an event is a named-event, it means the event is completely pre-coordinated, and no other information can be specified for the event. If the event is one of the data- events, the data and condition elements specify the triggering criteria. The data element specifies the structured component, and the condition element provides additional optional refinement of that structured component. If the event is periodic, the timing element defines when the event is triggered. For both data- and periodic events, a name can be provided as a shorthand for the formal semantics provided by the other elements.

The type of triggering event.

A formal name for the event. This may be an absolute URI that identifies the event formally (e.g. from a trigger registry), or a simple relative URI that identifies the event in a local context.

An event name can be provided for all event types, but is required for named events. If a name is provided for a type other than named events, it is considered to be a shorthand for the semantics described by the formal description of the event.

The timing of the event (if this is a periodic trigger).

The triggering data of the event (if this is a data trigger). If more than one data is requirement is specified, then all the data requirements must be true.

This element shall be present for any data type trigger.

A boolean-valued expression that is evaluated in the context of the container of the trigger definition and returns whether or not the trigger fires.

Need to be able to formally describe the triggering criteria.

This element can be only be specified for data type triggers and provides additional semantics for the trigger. The context available within the condition is based on the type of data event. For all events, the current resource will be available as context. In addition, for modification events, the previous resource will also be available. The expression may be inlined, or may be a simple absolute URI, which is a reference to a named expression within a logic library referenced by a library element or extension within the containing resource. If the expression is a FHIR Path expression, it evaluates in the context of a resource of one of the type identified in the data requirement, and may also refer to the variable %previous for delta comparisons on events of type data-changed, data-modified, and data-deleted which will always have the same type.

A expression that is evaluated in a specified context and returns a value. The context of use of the expression must specify the context in which the expression is evaluated, and how the result of the expression is used.

A brief, natural language description of the condition that effectively communicates the intended semantics.

A short name assigned to the expression to allow for multiple reuse of the expression in the context where it is defined.

The media type of the language for the expression.

An expression in the specified language that returns a value.

A URI that defines where the expression is found.

If both a reference and an expression is found, the reference SHALL point to the same expression.

Specifies clinical/business/etc. metadata that can be used to retrieve, index and/or categorize an artifact. This metadata can either be specific to the applicable population (e.g., age category, DRG) or the specific context of care (e.g., venue, care setting, provider of care).

Consumers of the resource must be able to determine the intended applicability for the resource. Ideally, this information would be used programmatically to determine when and how it should be incorporated or exposed.

A code that identifies the type of context being specified by this usage context.

A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.