This page is part of the FHIR Specification (v0.0.82: (v1.0.2: DSTU 1). 2). The current version which supercedes this version is 5.0.0 . For a full list of available versions, see the Directory of published versions . Page versions: R5 R4B R4 R3 R2

• Content
• Detailed Descriptions
• Operations

1.10 1.11 Base Resource Definitions

1.10.3 1.11.3 Resource Content

1.10.3.1 1.11.3.1 Terminology Bindings

Path	Definition	Type	Reference
Resource.language	A human language language.	Required	IETF language tag

1.10.3.2 1.11.3.2 Resource Identity

Each resource has an "id" element which contains the logical identity of the resource assigned by the server responsible for storing it. Resources always have a known identity except for the special case when a new resources is being sent to a server to assign an identity ( create interaction ). The logical identity is unique within the space of all resources of the same type on the same server. Once assigned, the identity is never changed, though copies of changed. Note that if the same resource made elsewhere may is copied to another server, the copy might not be able to retain the same logical identity.

The full literal identity of a resource - the actual HTTP address it which it can be accessed - is an absolute URL constructed from the server base address at which it is found, the resource type, and the Logical Id, such as http://test.fhir.org/rest/Patient/123 (where 123 is the Logical Id). Note that implementations SHOULD NOT assume that the identity of a resource is always resolvable to a literal server - it may be temporarily unavailable, or not available by policy (e.g. firewalls) or in some cases, it may not actually exist (e.g. use of resource outside a RESTful environment). Resources reference each other by their identity. These references are allowed to be absolute or relative (see Resource References for further discussion). Copying or moving resources from one server to another means that resources acquire a new identity. For further details, see Managing Resource Identity .

Logical ids (and therefore literal identities) are case sensitive. Logical Ids are always opaque, and external systems need not and should not attempt to determine their internal structure. An A logical id SHALL always be represented in the same way in resource references and URLs. Ids can be up to 64 characters long, and contain any combination of upper and lowercase ASCII letters, numerals, "-" and ".".

1.10.3.2.1 1.11.3.2.1 "Business" Identifiers

In addition to the Resource logical id and literal identity element "id", discussed above, many resources contain an element named "identifier", which, if populated, contains a different kind of identifier. The resource identity is a direct ("literal") reference that is intended to be accessed via http for a resource to be returned. As a resource is resources are copied from server to server, the resource their literal identity will change as the servers assign identities to the resource. change, and their logical id may change.

However However, all copies of the reosurce resource refer to the same underlying concept, and this concept may also be represented in other formats (variously, v2, CDA, HL7 v2 , CDA , XDS, and many more). Each representation carries the same identifier that identifies it consistently across all contexts of use. This is known as the business identifier, and is found in the identifier element. In a few resources, there is a url element that serves a similar purpose, but is constrained to be a literal URL. URL for implementation reasons.

All resources that have an identifier element support searching by the identifier, so that records can located by that method. So if an HL7 v2 message has the following OBR:

OBR|1|845439^GHH OE|1045813^GHH LAB|1554-5^GLUCOSE^LN|||200202150730|...

Then the DiagnosticReport it represents can be located using the following query:

 GET [base]/DiagnosticReport?identifier=1045813

If a FHIR server is a stable server that is the canonical master source for the definition of a concept, the business identifier for all systems may be the same as the literal identity of the resource on the master server.

1.10.3.3 1.11.3.3 Resource Metadata

Each resource contains an element "meta", of type "Meta", which is a set of metadata that provides technical and workflow context to the resource. The metadata items are all optional, though some of all of them may be required in particular implementations or contexts of use.

Metadata Item	Type	Usage
versionId (0..1)	id	Changes each time the content of the resource changes. Can be referenced in a resource reference . Can be used to ensure that updates are based on the latest version of the resource. The version can be globally unique, or scoped by the Logical Id of the resource. Version identifiers are generally either a serially incrementing id scoped by the logical id, or a uuid, though neither of these approaches is required. There is no fixed order for version ids - clients cannot assume that a versionId that comes after another one either numerically or alphabetically represents a later version. The same versionId can never be used for more than one version of the same resource. Note that servers SHOULD support versions, but some are unable to
lastUpdated (0..1)	instant	If populated, this value changes each time the content of the resource changes. it can be used by a system or a human to judge the currency of the resource content. Note that version aware updates do not use this element
profile (0..*)	uri	An assertion that the content conforms to a resource profile (a StructureDefinition . ). See Extending and Restricting Resources for further discussion. Can be changed as profiles and value sets change or the system rechecks conformance
security (0..*)	Coding	Security labels applied to this resource. These tags connect resources in specific ways to the overall security policy and infrastructure. Security tags can be updated when the resource changes, or whenever the security sub-system chooses to
tag (0..*)	Coding	Tags applied to this resource. Tags are used to relate resources to process and workflow. Applications are not required to consider the tags when interpreting the meaning of a resource.

Meta is used in the following places: Resource Note that the RESTful API defines some Operations that provide direct read and write access to the meta element.

1.10.3.3.1 1.11.3.3.1 Technical vs Business Versions

All resources are conceptually versioned, and each resource sits at the head of a linear list of past versions. The past versions are superceded superseded by the current version, and only available for audit/integrity purposes. The current version is e.g. http://acme.org/fhir/ResourceType/id123, and a past version would be http://acme.org/fhir/ResourceType/id123/_history/v2.

Note that there's no requirement for servers to keep a history. The history interaction is provided for where this is an appropriate service to provide. However, Whether whether a server keeps them or not, past versions are dead and gone. The current version of the resource is in the Resource.meta.versionId . For a value set this would be:

<ValueSet>
  <meta>
    <versionId value="v2"/>
  </meta>
</ValueSet>

That version changes every time the server updates the resource and writes a new version over the top of an existing one.

Some resources have another version marker in them. For instance, ValueSet has another version in it:

<ValueSet>
  <url value="http://acme.com/fhir/ValueSet/example"/>
  <version value="2.0"/>
</ValueSet>

This says that this is version 2.0 of the 'example' value set. This is the business version of the value set, the one that humans get involved with. These 2 versions elements have quite different lifecycles. To illustrate, take these cases:

1. A value set is posted to a server (POST [base]/ValueSet) with ValueSet.url = "http://acme.com/valuesets/example". This is identified as the 1st version of the value set (ValueSet.version = 1). When the server gets it, it assigns an identity e.g. ValueSet.id = x1, and ValueSet.meta.versionId = 1. Later, another user creates a revised version of the value set, and this is called version 2. It is commmited committed to the server as an update (PUT [base]/ValueSet/x1).
   Now, ValueSet.url = http://acme.com/valuesets/example, ValueSet.id = x1, ValueSet.version = 2 and ValueSet.meta.versionId = 2
2. A value set is posted to a server (POST [base]/ValueSet) with ValueSet.url = "http://acme.com/valuesets/example". This is identified as the 1st version of the value set (ValueSet.version = 1). When the server gets it, it assigns an identity e.g. ValueSet.id = x1, and ValueSet.meta.versionId = 1. Then a typo is found in the definition, so this is fixed, but it's still v1 of the value set. This is PUT to [base]/ValueSet/x1. Now, ValueSet.url = http://acme.com/valuesets/example, ValueSet.id = x1, ValueSet.version = 1 and ValueSet.meta.versionId = 2.
   Later, another user creates a revised version of the value set, and this is called version 2. It is commmited to the server as an update (PUT [base]/ValueSet/x1). Now, ValueSet.url = http://acme.com/valuesets/example, ValueSet.id = x1, ValueSet.version = 2 and ValueSet.meta.versionId = 3
3. A value set is posted to a server (POST [base]/ValueSet) with ValueSet.url = "http://acme.com/valuesets/example". This is identified as the 1st version of the value set (ValueSet.version = 1). When the server gets it, it assigns an identity e.g. ValueSet.id = x1, and ValueSet.meta.versionId = 1. Later, another user creates a revised version of the value set, and this is called version 2. This time, as well as supporting this new version 2, there are production systems still using version 1, and both need to be valid on the value set server. So a new value set is created on the server (POST [base]/ValueSet) and is assigned the identiity 'x2'.
   Now, there are two different value sets, both with URL "http://acme.com/valuesets/example". One has ValueSet.id = x1, ValueSet.version = 1 and ValueSet.meta.versionId = 1 and the other has ValueSet.id = x2, ValueSet.version = 2 and ValueSet.meta.versionId = 1.

1.10.3.4 1.11.3.4 Implicit Rules

A reference to a custom agreement about how the resources are used that was followed when the resource was constructed, and which must be understood when processing the content.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term, and should be avoided where possible. However However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally exchangeable sense.

Note that resources are almost always constructed following some custom agreement. Best practice is that such agreements make all knowledge about the content of the resource explicit; if custom agreements do this, and declare their extensions as required, then it is not necessary to understand the agreement when processing the resource content.

1.10.3.5 1.11.3.5 Language

Each resource may have a language element that specifies the base language of the content using a code defined in BCP 47 . The language element is provided to support indexing and accessibility (e.g. text-to-speech use the language tag).

There is no default language, though one may be inferred from the context of use. Not all of the content of the resource has to be in the specified language.

If a language is specified, it should also be specified on the Narrative Text . The html language tag in the narrative is used when processing the narrative. The language tag on the resource is provided for use to so that applications processing the data in the resource can specify the language of any alternate presentations generated from the data in the resource data.

1.10.3.6 1.11.3.6 Tags, Profiles, and Security Labels

These 3 metadata attributes are part of the resource, but are never used to keep information that needs to be understood when interpreting the content of a resource; their function is limited to finding and controlling access to the resource, and connecting resources to technical or clinical workflow.

1.10.3.6.1 1.11.3.6.1 Tags

Tags are used to associate additional operational information with the Resources, including such as workflow management. A typical use of tagging would be to maintain an informal list of resources that need review.

In a general tag, the coded concept may be a reference to a healthcare vocabulary, including ones defined in this specification, or vocabularies such as those defined by HL7 for other purposes (e.g. HL7 v2 and v3/CDA), HL7 v3 / CDA ), LOINC, or SNOMED CT. Alternatively, the concept may be one defined by the implementation in the local context.

The list of tags on a resource is a set, where each tag is unique based on the system + code combination.

1.10.3.6.2 1.11.3.6.2 Profile Tags

A profile assertion represents a claim that the resource conforms to the identified StructureDefinition , which makes rules about what content is allowed to be in a resource. In a profile tag, the term is a URL that references a the an identified StructureDefinition resource.

It's always possible to determine whether a resource conforms to any profile simply by testing it against the profile (the validation tools provide the functionality to perform this test in a variety of contexts). However there are several circumstances where simply examining whether a resource conforms to a particular profile as needed is impractical:

• A server searching a set of resources for ones that conform to a particular profile
• A receiver that has many profiles to choose when validating resource

Profile Tags serve these use cases - a client/creator of a resource can tag the resource with an assertion that the resource conforms to a particular structure definition. The server/receiver of the resource can choose to take this assertion at face value, or to assist in locating the correct StructureDefinition against which to validate the resource.

Note: resources can conform to multiple profiles at once. A resource can conform to a profile without ever being labelled labeled that it does, or a resource may falsely claim to conform to a profile. For this reason, applications processing resources SHOULD always depend on the contents of the resource when processing them, and/or check resources against the StructureDefinition s directly rather than relying the existence of profile tags for meaning. Profile Tags are provided as a method of finding resources that conform to a particular StructureDefinition , not statements of meaning about the resource.

Many trading partner agreements will make rules about what claims can be made and when they must be tested, which will make the profile assertion more reliable.

The list of profiles on a resource is a set, where each profile is unique based the value of the URI.

1.10.3.6.3 1.11.3.6.3 Security Labels

A security label is attached to a resource to provide specific security metadata about the information in the resource. For further information, see Security Labels .

The list of security on a resource is a set, where each tag is unique based on the system + code combination.

1.10.3.7 1.11.3.7 Updates to Tags, Profiles, and Security Labels

When a resource is updated (e.g. on the RESTful interface), servers generally follow this pattern:

• Merge existing and new tags
• Replace existing profile tags with new profile tags
• Merge existing and new security labels

However, in some cases, an update may invalidate existing tags. Servers may update or remove previously existing recognized tags if this is known to be appropriate.

1.11.3.8 Maturity Levels

All resources in this specification are assigned a "Maturity Level", known as FMM (after the well known CMM grades). The FMM level can be used by implementers to judge how advanced - and therefore stable - a resource is. The following FMM levels are defined:

0. the resource or profile (artifact) has been published on the current build
1. FMM0 + the artifact produces no warnings during the build process and the responsible WG has indicated that they consider the artifact substantially complete and ready for implementation
2. FMM1 + the artifact has been tested and successfully exchanged between at least three independently developed systems at a connectathon whose results have been reported to the FHIR Management Group
3. FMM2 + the artifact has been verified by the work group as meeting the DSTU Quality Guidelines and has been subject to a round of formal balloting with at least 10 implementer comments drawn from at least 3 organizations resulting in at least one substantive change
4. FMM3 + he artifact has been tested across its scope (see below), published in a formal publication (e.g. DSTU), and implemented in multiple prototype projects. As well, the responsible work group agrees the resource is sufficiently stable to require implementer consensus for subsequent non-backward compatible changes.
5. FMM4 + the artifact has been published in two formal publication release cycles at FMM1+ (i.e. DSTU level) and has been implemented in at least 5 independent production systems in more than one country

The Maturity level is strongly related to stability; the higher the maturity level, the more controls are enforced to restrict breaking changes to the resource. For further information, and discussion, see the FHIR Wiki .

1.11.3.9 Further Information

• Conformance Rules
• Resource Definitions
• References between Resources
• Narratives
• Formats: XML , JSON
• Extensibility ( Examples )
• Detailed Descriptions
• Inter-version Compatibility

1.10.4 1.11.4 Search Parameters

Common search parameters defined by this resource. See Searching for more information about searching in REST, messaging, and services.

Resource.id

Name	Type	Description	Paths
_id _content	token string	Logical id Search on the entire content of this artefact the resource
_language _id	token	Language Logical id of the resource content this artifact	Resource.language Resource.id
_lastUpdated	date	When the resource version last changed	Resource.meta.lastUpdated
_profile	uri	Profiles this resource claims to conform to	Resource.meta.profile
_query	token	A custom search profile that describes a specific defined query operation
_security	token	Security Labels applied to this resource	Resource.meta.security
_tag	token	Tags applied to this resource	Resource.meta.tag
_text	string	Search on the narrative of the resource